Darkglass Electronics Microtubes X7 Distortion Pedal Review

Microtubes X7 Distortion Pedal Specs:

Controls / High Side

• High Pass Frequency: controls the cutoff frequency to be
• distorted, ranging from 100Hz (for thicker, fuzzier saturation) or
• 1kHz for ultra-sharp definition.
• High Drive: Sets the amount of distortion for the high pass side.
• High Level: Sets the output volume of the distorted high-pass
• signal.
• Low Pass Frequency: controls the cutoff frequency to be mixed
• back to the high-pass side. Ranging from 50Hz (for only
• sub-bass) and 500Hz to preserve some clean mids.
• Low Comp: Sets the amount of compression for the low-pass
• signal.
• Low Level: Sets the output volume of the low-pass signal.

Controls / Sliders

• Master: Sets the overall volume of the unit.
• Low shelf: +-12dB @ 80 Hz
• 500 Hz: +-12dB
• 1 kHz: +-12dB
• High shelf: +-12dB @ 5 kHz
• Input: 1/4″ connector for the instrument.
• Input Impedance: 1M_ impedance.
• Parallel Output: hard-wired copy of the input via 1/4″ connector.
• Output: 1/4″ connector for the amplifier or next effect in the chain.
• Direct Output: Balanced output via XLR connector. When the
• pedal is engaged it features a low pass filter to perfectly sculpt
• the distorted signal for direct applications.
• Output Impedance: 1k_.
• 9VDC: Center negative, regulated 9VDC only.
• Current Consumption: 70mA

The Darkglass Microtubes X7 Distortion Bass Effects Pedal is available online at GuitarCenter.com